NC7SZ373L6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 18mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SZ373 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Inverting, Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 1μA |
| Number of Bits | 1 |
| Propagation Delay | 4.3 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 2.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Output Lines | 3 |
| Height | 550μm |
| Length | 1.45mm |
| Width | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ373L6X Overview
In the package 6-UFDFN, it can be found. As a result, it has a packaging of Tape & Reel (TR). The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 1.65V~5.5V. A temperature of -40°C~85°C is used for operation. 7SZ is the series number of this FPGA. The design of this electronic part contains 1 bits. This device is designed with 6 terminations. 7SZ373 is its family. The device works with a voltage of 1.8V for its supply voltage. It is a member of the LVC/LCX/Z family of electronic devices. The device has 6 pins. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. Its reliable performance makes it an excellent choice for TAPE AND REEL. It follows that 3 output lines are generated from the binary equivalent of the input line. It consumes 1μA of quiescent current without being affected by outside factors.
NC7SZ373L6X Features
6-UFDFN package
7SZ series
1 Bits
7SZ373 family
6 pins
NC7SZ373L6X Applications
There are a lot of ON Semiconductor NC7SZ373L6X Latches applications.
- Shift register
- A/D converters
- Automatic test equipment
- Frequency dividing
- Pattern generators
- Digital bus buffer
- Stacked or Push-Down Registers
- Avionics
- Address register
- Hammer
