NC7SZ374P6
| Parameters | |
|---|---|
| Lifecycle Status | CONSULT SALES OFFICE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Base Part Number | 7SZ374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 32mA |
| Number of Bits | 1 |
| Clock Frequency | 175MHz |
| Propagation Delay | 4 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 9.7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ374P6 Overview
The package is in the form of 6-TSSOP, SC-88, SOT-363. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 7SZseries comprises this type of FPGA. You should not exceed 175MHzin the output frequency of the device. A total of 6 terminations have been made. The 7SZ374 family contains this object. A voltage of 1.8V is used to power it. There is 3pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. The electronic part is mounted in the way of Surface Mount. A total of 6pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. An electronic part designed with 1bits is used in this application. 5.5Vis the maximum supply voltage (Vsup). The superior flexibility of this product is achieved by using 1 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are 2 ports embedded in the flip flops. The output current of 32mA makes it feature maximum design flexibility. It is designed with 3 output lines. There is a consumption of 1μAof quiescent current from it.
NC7SZ374P6 Features
Tape & Reel (TR) package
7SZ series
6 pins
1 Bits
NC7SZ374P6 Applications
There are a lot of ON Semiconductor NC7SZ374P6 Flip Flops applications.
- Individual Asynchronous Resets
- Storage Registers
- Data storage
- Automotive
- Divide a clock signal by 2 or 4
- Reduced system switching noise
- Synchronous counter
- EMI reduction circuitry
- ESD performance
- Registers
