banner_page

NC7SZ384M5X

5 Terminations4V~5.5V 5 Pin 7SZ384 Signal switch7SZ Series 1 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NC7SZ384M5X
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 216
  • Description: 5 Terminations4V~5.5V 5 Pin 7SZ384 Signal switch7SZ Series 1 Functions(Kg)

Details

Tags

Parameters
Supply Voltage 4.5V
Base Part Number 7SZ384
Operating Supply Voltage 5V
Circuit 1 x 1:1
Polarity Non-Inverting
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Channels 1
Number of Ports 2
Number of Bits 1
Throw Configuration SPST
Propagation Delay 250 ps
Quiescent Current 10μA
Turn On Delay Time 5.5 ns
Family LVC/LCX/Z
Output Characteristics 3-STATE
Supply Type Single
Address Bus Width 1b
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height 1.25mm
Length 3mm
Width 1.7mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status LAST SHIPMENTS (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Weight 30mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2005
Series 7SZ
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Bus Switch
Resistance 20Ohm
Terminal Finish Tin (Sn)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1

NC7SZ384M5X Overview


Due to the fact that it is provided in the SC-74A, SOT-753, digital switch allows the board to be compacted.It is packaged according to the Tape & Reel (TR) method.The mounting method digital switch ic uses is Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 7SZ series can be used in a wide range of applications.Its basic configuration includes terminations in the 5 range.As its base part number is 7SZ384, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 4.5V is supplied.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic is configured with 5 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.There are 1 bits signal multiplexer provides.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.During mux switch's normal operation, 5V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 10μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The resistance of the signal switching is 2.A resistance of 20Ohm is used to operate it.A total of 1 transmission channels are available in the turn signal switch's circuit.

NC7SZ384M5X Features


Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

NC7SZ384M5X Applications


There are a lot of ON Semiconductor NC7SZ384M5X Signal Switches / Multiplexers / Decoders applications.

  • Speed control of medern motors
  • High-performance memory-decoding applications
  • Injectors
  • Analog, digital or video signal switching
  • Textile mills
  • Transmission from the computer system of a satellite
  • Electronically controlled engine system
  • CNC machines
  • RF-based home automation system
  • Combinational circuit

Write a review

Note: HTML is not translated!
    Bad           Good