NC7SZ384P5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 23g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 10Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 7SZ384 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 5.5 ns |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ384P5X Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 5-TSSOP, SC-70-5, SOT-353.The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 7SZ series are suitable for a wide range of applications.It is designed with 5 terminations as part of its basic configuration.The base part number is 7SZ384, which is also useful when looking up signal switch's related components.The multiplexer's system works with 4.5V voltage.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.With 5 pins, it is configured.It is positioned in the direction of Surface Mount.The logic switch is included into the family of LVC/LCX/Z.The multiplexer ic provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.During mux switch's normal operation, 5V is provided with a power supply.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 10μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The system operates with a resistance of 2.10Ohm is the resistance at which it operates.In mux switch configuration, there are 1 elements.
NC7SZ384P5X Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
NC7SZ384P5X Applications
There are a lot of ON Semiconductor NC7SZ384P5X Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Metal detectors
- Analog, digital or video signal switching
- Computer memory
- Code converters
- Make full adder
- Enabling different rows of memory depending on address in memory chips
- Microprocessor input/output systems
- Time division multiplexing system
- Data distribution
