NC7SZ66M5X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 7SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | 7SZ66 |
| Number of Outputs | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Voltage | 5V |
| Power Dissipation | 200mW |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Quiescent Current | 50nA |
| Turn On Delay Time | 7 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 9.2 ns |
| High Level Output Current | 128mA |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Single Supply |
| On-state Resistance Match-Nom | 125Ohm |
| Normal Position | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ66M5X Overview
Providing this information in the SC-74A, SOT-753 enables digital switch board space to be saved.As a result, it is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 1.65V~5.5V voltage.Multiplexers from the 7SZ series can be used in a wide range of applications.This configuration includes 5 terminations as part of its basic functionality.As its base part number is 7SZ66, logic switch can also be used to find its related parts.The multiplexer's system works with 1.8V voltage.As a result, conductors end at GULL WING.In this case, the supply type is Single.This multiplexer ic has 5 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.mux switch's normal operation requires the power supply of 3.3V.There are 1 outputs designed to operate the turn signal switch.Part number Multiplexer or Switches indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 50nA current of multiplexer ic.A resistance of 5Ohm is used to operate it.For transmission, there are 1 channels in the turn signal switch's circuit.
NC7SZ66M5X Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 3.3V
NC7SZ66M5X Applications
There are a lot of ON Semiconductor NC7SZ66M5X Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- To select different devices in microprocessor input
- Communication system
- Medical industry
- Steel plants
- Arithmetic Logic Units
- Telephone network
- Electronically controlled engine system
- Make half adder
- Speed control of medern motors
