NC7SZ74L8X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SZ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7SZ74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 6.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7SZ74L8X Overview
It is embeded in 8-UFQFN case. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 7SZseries of FPGAs. Its output frequency should not exceed 200MHz. A total of 8 terminations have been made. The object belongs to the 7SZ74 family. The D flip flop is powered by a voltage of 1.8V . Its input capacitance is 3pF farads. LVC/LCX/Zis the family of this D flip flop. Surface Mount mounts this electronic component. With its 8pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 1bits are used in this part. In this case, the maximum supply voltage (Vsup) reaches 5.5V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. In terms of quiescent current, it consumes 1μA . A total of 1 channels are available.
NC7SZ74L8X Features
Tape & Reel (TR) package
7SZ series
8 pins
1 Bits
3.3V power supplies
NC7SZ74L8X Applications
There are a lot of ON Semiconductor NC7SZ74L8X Flip Flops applications.
- Latch-up performance
- Parallel data storage
- ESCC
- Instrumentation
- Safety Clamp
- Circuit Design
- Patented noise
- High Performance Logic for test systems
- Matched Rise and Fall
- Supports Live Insertion
