banner_page

NC7WB3125K8X

8 Terminations4V~5.5V 8 Pin 7WB3125 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NC7WB3125K8X
  • Package: 8-VFSOP (0.091, 2.30mm Width)
  • Datasheet: PDF
  • Stock: 569
  • Description: 8 Terminations4V~5.5V 8 Pin 7WB3125 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VFSOP (0.091, 2.30mm Width)
Number of Pins 8
Weight 30mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Bus Switch
Resistance 20Ohm
Terminal Finish Tin (Sn)
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.5mm
Base Part Number 7WB3125
Operating Supply Voltage 5V
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Circuits 2
Number of Ports 2
Output Current 64mA
Number of Bits 1
Throw Configuration SPST
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Address Bus Width 2b
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height 700μm
Length 2mm
Width 2.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NC7WB3125K8X Overview


In order to conserve board space, digital switch is included in the 8-VFSOP (0.091, 2.30mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.There is a design for terminating 8 as part of its basic configuration.To find signal switch's related components, a base part number of 7WB3125 may also be used.The multiplexer's system is powered by 4.5V voltage.As the end of conductors, it uses GULL WING.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.The mount is in Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.The multiplexer ic provides 1 bits.Keep Vsup at 4V to avoid unnecessary failures.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.No external influence consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The resistance of the signal switching is 2.A resistance of 20Ohm is used to operate the signal switching.For greater switches' flexibility, 64mA provides the output current.2 circuits are formed for the normal operation of the digitalswitch.

NC7WB3125K8X Features


Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

NC7WB3125K8X Applications


There are a lot of ON Semiconductor NC7WB3125K8X Signal Switches / Multiplexers / Decoders applications.

  • Memory chips
  • Microprocessor input/output systems
  • Medical industry
  • Robotic vehicles
  • Enabling different rows of memory depending on address in memory chips
  • Transmission from the computer system of a satellite
  • Video transmission
  • D/A converters
  • Frequency multiplexing system
  • Make half adder

Write a review

Note: HTML is not translated!
    Bad           Good