NC7WB66L8X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | NC7WB66 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 250mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 10.5 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.2ns, 4.1ns |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -70dB @ 10MHz |
| Switch-on Time-Max | 5.6ns |
| Switch-off Time-Max | 6.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 0.55mm |
| Length | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7WB66L8X Overview
The electrical component comes in 8-UFQFN packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, 8 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching for NC7WB66 variants of the analog switch ic. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. An effective Single supply digital multiplexer. 1.65V is the lowest voltage the electrical component should receive. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A 2 input needs to be operated.
NC7WB66L8X Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
NC7WB66L8X Applications
There are a lot of ON Semiconductor NC7WB66L8X Analog Switches & Multiplexers ICs applications.
- Communication systems
- Cellular phones
- Microwave transmission systems
- Switching Systems
- Mechanical reed relay replacement
- Battery-powered systems
- Imaging
- Digital Cross-Connects
- Fiber In The Loop (FITL)
- Frame Relay Equipment
