NC7WBD3125K8X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 7WBD3125 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Drain to Source Voltage (Vdss) | 20V |
| Address Bus Width | 2b |
| Continuous Drain Current (ID) | 20A |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height | 700μm |
| Length | 2mm |
| Width | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NC7WBD3125K8X Overview
It is included in the 8-VFSOP (0.091, 2.30mm Width) in order to save board space.The package is in the form of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.There are 8 terminations included in its basic configuration.To find signal switch's related components, a base part number of 7WBD3125 may also be used.The voltage supplied for multiplexer's system is 5V.multiplexer's systemAs a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic is configured with 8 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 1 bits signal multiplexer provides.In order for 5V to operate normally, a power supply is provided.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.A resistance of 50Ohm is used to operate the signal switching.This mux switch configuration has 2 elements.
NC7WBD3125K8X Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
NC7WBD3125K8X Applications
There are a lot of ON Semiconductor NC7WBD3125K8X Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- HD surveillance system
- Solenoid cooling fan
- Encrypted communications system
- Idle motor
- Memory system of computers
- Data demultiplexing
- To select different devices in microprocessor input
- Signal router
- Automation system
