NC7WBD3306K8X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | US8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 7W |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Bus Switch |
| Resistance | 50Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 7WBD3306 |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 500mV |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.8 ns |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NC7WBD3306K8X Overview
In order to conserve board space, digital switch is included in the 8-VFSOP (0.091, 2.30mm Width).It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 7W series, these multiplexers have a wide range of applications.You can also find related parts by using its logic switch base part number of 7WBD3306.Single is used as its supply type.Currently, it is configured with a 8 pin configuration.The mounting is in the way of Surface Mount.In this signal multiplexer, there are 2 bits provided.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.50Ohm is the resistance at which it operates.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 7V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 500mV.A configuration element for the mux switch consists of 2 elements.
NC7WBD3306K8X Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
NC7WBD3306K8X Applications
There are a lot of ON Semiconductor NC7WBD3306K8X Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Logic gates for other digital devices
- Analog, digital or video signal switching
- Injectors
- Microprocessor input/output systems
- Medical industry
- Code conversion
- Make full adder
- Communication system
- Arithmetic Logic Units
