NCL30080ASNT1G
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Frequency | 65kHz |
| Base Part Number | NCL30080 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5mA |
| Output Current | 500mA |
| Max Supply Current | 1mA |
| Topology | Flyback |
| Min Input Voltage | 16V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Switching Frequency | 150kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
NCL30080ASNT1G Overview
It saves board space with the SOT-23-6 Thin, TSOT-23-6 package. LED drivers use 1 outputs for their design.Surface Mount is used for mounting.AC DC Offline Switcher emerges with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.In the 65kHz frequency range, it operates.The system operates with a termination of 0.It is configured with 6 pins as its base.Undetermined failures may occur when the voltage supply is less than 8.8V.It's mounted by Surface Mount.The base part number for this LED driver is NCL30080.It is acceptable to supply voltages of 28V volts.It consists of 6 pins.According to its characteristics, it is also categorized into Display Drivers.With a minimum input voltage of 16V volts, it can operate.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 9.4V.20V is the maximum value of the supply current.If the maximum current supply is less than 1mA, this device provides high efficiency.There is no current available to supply to the load.Having the switching frequency at 150kHz enables this electronic component to perform at its best.The voltage at the output terminal is 200V.
NCL30080ASNT1G Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Switching frequency of 150kHz
Output voltage of 200V
NCL30080ASNT1G Applications
There are a lot of ON Semiconductor NCL30080ASNT1G LED Driver ICs applications.
- Replacement lamps
- Stage and Studio lighting
- Medical surgery lighting
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
- Gallery lighting
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Flicker-free LED Lighting using R1580N
