NCL30080BSNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | NCL30080 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5mA |
| Max Supply Current | 1mA |
| Topology | Flyback |
| Min Input Voltage | 8.2V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Switching Frequency | 65kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCL30080BSNT1G Overview
SOT-23-6 Thin, TSOT-23-6 saves board space. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.It is able to work normally at the operating temperature of -40°C~125°C TA.The operation of this system is supported by 6 terminations.There are 6 pins used to form the base of its configuration.Failures may occur if the voltage supply is below 8.8V.It has been mounted on Surface Mount.This LED driver can be found under the base part number NCL30080.28V is a reasonable voltage.On this device, there are 6 pins.Further, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 8.2V is required for it to operate.A minimal supply voltage of 9.4V is required for it to achieve the highest efficiency.In the event that the maximum supply current is allowed, it reaches 20V.Its high efficiency is based on the fact that the maximal supply current should not exceed 1mA.It is necessary to power systems with a voltage of 12VIt is capable of fulfilling its full functionality when the switching frequency remains at 65kHz.There is 200V voltage output from it.
NCL30080BSNT1G Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TA
Supply voltage of 12V
Operating with the supply voltage of 12V
Switching frequency of 65kHz
Output voltage of 200V
NCL30080BSNT1G Applications
There are a lot of ON Semiconductor NCL30080BSNT1G LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- Down lighting
- Amusement Machines
- Dimmable LED for vehicle interiors
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- OLED power supply for portable equipment
- Museum lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lighting PFCs, Linear Dimmable
