NCL30081ASNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Frequency | 65kHz |
| Base Part Number | NCL30081 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 300V |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5mA |
| Output Current | 3A |
| Max Supply Current | 1mA |
| Topology | Flyback |
| Min Input Voltage | 16V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Switching Frequency | 150kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCL30081ASNT1G Overview
There is also a SOT-23-6 Thin, TSOT-23-6 package that is used to save space on the board. In this LED driver, there are 1 outputs.The led light driver is mounted using Surface Mount.In this case, it emerges as a AC DC Offline Switcher with a high efficiency.It is capable of working normally at -40°C~125°C TA.Frequency 65kHz is the basis of operation.It is designed to work with 6 terminations.A configuration of this chip is made up of 6 pins.The voltage supply can fail if it is below 8.8V.The mount is in the direction of Surface Mount.NCL30081 is the base part number for this LED driver.The voltage of 20V is acceptable.The device has 6 pins.In addition, a Display Drivers is assigned based on the characteristics of the object.A minimal input voltage of 16V is required for it to operate.For maximum efficiency, it operates at the minimal voltage of 9.4V.In the event that the maximum supply current is allowed, it reaches 20V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 1mA.In this case, the load can only be supplied with 3A current.Having the switching frequency at 150kHz enables this electronic component to perform at its best.A 300V voltage is output by it.
NCL30081ASNT1G Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Switching frequency of 150kHz
Output voltage of 300V
NCL30081ASNT1G Applications
There are a lot of ON Semiconductor NCL30081ASNT1G LED Driver ICs applications.
- High-end retail lighting
- Amusement Machines
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Scanners and Handy Terminals
- Medical surgery lighting
- LED Lightings for Industrial Equipment
