NCL30082ADMR2G
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Frequency | 65kHz |
| Base Part Number | NCL30082 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 300V |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5mA |
| Output Current | 3A |
| Max Supply Current | 1.2mA |
| Topology | Flyback |
| Min Input Voltage | 16V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 150kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
NCL30082ADMR2G Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used to save board space. There are 1 outputs used for the design of this LED drivers.Surface Mount represents this mounting method.In this case, it emerges as a AC DC Offline Switcher with a high efficiency.When the temperature is -40°C~125°C TA, it can work normally.As a result, it operates in accordance with the frequency of 65kHz.In this case, it operates with terminations of 0.To form its configuration, there are 8 pins.A voltage supply less than 8.8V could result in undetermined failures.It's mounted by Surface Mount.This LED driver can be found under the base part number NCL30082.It is acceptable to have a maximum voltage of 20V.In this device, there are 8 pins.According to its characteristics, it is also classified into Display Drivers.When the input voltage is set to 16V, it operates.A minimal supply voltage of 9.4V is required for it to achieve the highest efficiency.There is 20V maximum value for supply current.As long as the maximum supply current is less than 1.2mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 3A current.It's possible for this electronic component to fully function when the switching frequency is maintained at 150kHz.There is 300V voltage at the output terminal.
NCL30082ADMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Switching frequency of 150kHz
Output voltage of 300V
NCL30082ADMR2G Applications
There are a lot of ON Semiconductor NCL30082ADMR2G LED Driver ICs applications.
- Stage Lighting and Signage
- Stage and Studio lighting
- Street lighting
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for portable equipment
- Sports Facility Lighting
- Gallery lighting
- Replacement lamps
- Amusement Machines
- Medical surgery lighting
