NCL30082B1DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Base Part Number | NCL30082 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Max Supply Voltage | 20V |
| Output Current | 500mA |
| Max Supply Current | 1.2mA |
| Topology | Flyback |
| Min Input Voltage | 8.2V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 65kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30082B1DMR2G Overview
In order to save board space, the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used. In LED drivers, the outputs are all set to 1.In this case, mounting method is Surface Mount.When it emerges as a AC DC Offline Switcher, it shows high-performance and reliability.-40°C~125°C TA is the operating temperature of the led driver.It operates using 8 terminations.It is configured with 8 pins as its base.It is possible for undetermined failures to occur if the voltage supply is lower than 8.8V.The mount is on its way to Surface Mount.Under the base part number NCL30082, you'll find this LED driver.20V is an acceptable voltage.The device has a pin count of 8.Moreover, it can be classified as Display Drivers due to its characteristics.The minimum input voltage for this device is 8.2V.In the case of supply current, there is a maximum value of 20V.Whenever the supply current is lower than 1.2mA, it can provide high efficiency.500mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform when the switching frequency is 65kHz.Currently, it is generating 200V voltage.
NCL30082B1DMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 12V
Switching frequency of 65kHz
Output voltage of 200V
NCL30082B1DMR2G Applications
There are a lot of ON Semiconductor NCL30082B1DMR2G LED Driver ICs applications.
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- White LED Backlight for portable equipment
- Down lights
- OLED power supply for portable equipment
- Linear fluorescent
- Replacement lamps
- Stage and Studio lighting
- Down lighting
