NCL30082BDMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Frequency | 65kHz |
| Base Part Number | NCL30082 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 200V |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5A |
| Max Supply Current | 1.2mA |
| Topology | Flyback |
| Min Input Voltage | 8.2V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Switching Frequency | 65kHz |
| Voltage - Supply (Min) | 8.8V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30082BDMR2G Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used for saving board space. In this LED driver, there are 1 outputs.In this case, mounting method is Surface Mount.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.The led light driver operates normally at -40°C~125°C TA. This system operates at 65kHz frequency.There are 8 terminations that are designed to operate with it.This LED driver is configured with a base of 8 pins.It is possible for undetermined failures to occur if the voltage supply falls below 8.8V.I have mounted it by Surface Mount.A base part number of NCL30082 is associated with this LED driver.An acceptable maximum value for the supply voltage is 20V.A total of 8 pins are present on this device.Further, it can be classified as Display Drivers based on its characteristics.This device operates with a minimum input voltage of 8.2V volts.As a result, it runs at a minimal voltage of 9.4V in order to achieve the best efficiency.20V is the maximum value of supply current that can be used.When the maximum supply current is below 1.2mA, it is capable of delivering high efficiency.Powering systems requires 12V voltages.When the switching frequency is maintained at 65kHz, this electronic component is able to fully play its functions.200V is the voltage at the output terminal.
NCL30082BDMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Operating with the supply voltage of 12V
Switching frequency of 65kHz
Output voltage of 200V
NCL30082BDMR2G Applications
There are a lot of ON Semiconductor NCL30082BDMR2G LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lighting
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
- A- lamps
- Constant Voltage Power Source for portable equipment
- General lighting
- Linear fluorescent
- Replacement lamps
