NCL30083ADMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 65kHz |
| Base Part Number | NCL30083 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 300V |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 9.4V |
| Nominal Supply Current | 5mA |
| Output Current | 3A |
| Max Supply Current | 1.2mA |
| Topology | Flyback |
| Min Input Voltage | 16V |
| Max Input Voltage | 20V |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Dimming | Multi-Step |
| Number of Segments | 1 |
| Switching Frequency | 150kHz |
| Voltage - Supply (Max) | 28V |
| Voltage - Supply (Min) | 8.8V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30083ADMR2G Overview
Space is saved using its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs are designed into LED drivers.In order to mount the led light driver, Surface Mount is used.In this case, it emerges as a AC DC Offline Switcher with a high efficiency.-40°C~125°C TA is a valid operating temperature for the led driver.Frequency 65kHz is the basis of operation.It operates with terminations of 8.The LED light driver is configured with a base of 0 pins.If the voltage supply is below 8.8V, undetermined failures may occur.The number of segments is estimated to be 1.Surface Mount is mounted on it.NCL30083 is the base part number for this LED driver.It is acceptable for the voltage to be 35V.8 pins are used on the device.It is designed to support a maximum value of 28V.The Display Drivers is also assigned based on its characteristics.The minimum input voltage for this device is 16V.The system operates at a minimum supply voltage of 9.4V in order to achieve maximum efficiency.There is 20V maximum value for supply current.Its high efficiency is based on the fact that the maximal supply current should not exceed 1.2mA.The current that can be supplied to the load is 3A.It's possible for this electronic component to fully function when the switching frequency is maintained at 150kHz.Currently, it is generating 300V voltage.
NCL30083ADMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Switching frequency of 150kHz
Output voltage of 300V
NCL30083ADMR2G Applications
There are a lot of ON Semiconductor NCL30083ADMR2G LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- High-end retail lighting
- Replacement lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- General lighting
- Amusement Machines
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- LED Lightings for Inspection Devices
