NCL30083BDMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Tin (Sn) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 65kHz |
| Base Part Number | NCL30083 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 2.65V |
| Operating Supply Voltage | 9.4V |
| Max Supply Voltage | 28V |
| Max Supply Current | 1.2mA |
| Topology | Flyback |
| Halogen Free | Halogen Free |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Dimming | Multi-Step |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 8.8V |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30083BDMR2G Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used for saving board space. A LED driver using this design has 1 outputs.Mounting is done according to the Surface Mount method.As a result, it appears as a AC DC Offline Switcher with a high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.The system operates on the basis of the frequency 65kHz.A termination of 8 is used to operate the LED driver.With 8 pins at the base, this LED driver has a base configuration.If the voltage supply is lower than 8.8V, undetermined failures may occur.There are estimated to be 1 segments.The mount is in the way of Surface Mount.Under the base part number NCL30083, you'll find this LED driver.The voltage of 28V can be supplied.In this device, there are 8 pins.Additionally, it can be classified as Display Drivers based on its characteristics.When the maximum supply current is less than 1.2mA, the device is able to provide a high level of efficiency.In order to power systems, 9.4V voltage is needed.The output voltage is 2.65V.
NCL30083BDMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 65kHz
Supply voltage of 12V
Operating with the supply voltage of 9.4V
Output voltage of 2.65V
NCL30083BDMR2G Applications
There are a lot of ON Semiconductor NCL30083BDMR2G LED Driver ICs applications.
- A- lamps
- Down lights
- General lighting
- White LED Backlight for portable equipment
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Panel lighting
