NCL30100SNT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | NCL30100 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Max Supply Voltage | 18V |
| Output Current | 1.2A |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6.35V |
| Max Input Voltage | 18V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 3 |
| Switching Frequency | 700kHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3.1mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCL30100SNT1G Overview
On the board, there is also a SOT-23-6 Thin, TSOT-23-6 package that saves space.LED drivers have a total of 1 outputs that are used in the design of the drivers.It adopts the way of Surface Mount for mounting.In this case, it emerges as a DC DC Controller with a high efficiency.If the led driver ic is set to -40°C~125°C TA, it will work normally.As a result, Lighting is likely to benefit greatly.The system operates with a termination of 0.There are 6 pins on its base.3 segments are present.As you can see, it is mounted by Surface Mount.There is a base part number NCL30100 for this LED driver.Ideally, the supply voltage should be 18V.6 pins are included in it.In addition, it can be classified as Display Drivers according to its characteristics.With a minimum input voltage of 6.35V volts, it can operate.It reaches 18V when the maximum supply current is allowed.There is no current that can be supplied to the load.This electronic component can fully perform its functions when the switching frequency is kept at 700kHz.
NCL30100SNT1G Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TA
Supply voltage of 12V
Switching frequency of 700kHz
NCL30100SNT1G Applications
There are a lot of ON Semiconductor NCL30100SNT1G LED Driver ICs applications.
- Panel lighting
- Sports Facility Lighting
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- General lighting
- Medical surgery lighting
- Gallery lighting
- High-end retail lighting
- Stage Lighting and Signage
- A- lamps
