NCP1001P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1001 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 1.4mA |
| Input Voltage (Min) | 7.9V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1001P Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .In Tube AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.There is 100kHz switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 7.5V~10V , the AC/DC converter may be used.There are a total of 8 terminations.The ac/dc converter has 8 pins.A total of 8 pins are present on the ac-dc converter.The NCP1001 family allows you to search for similar acdc converters.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .An amount of current of 2A can be supplied to the ac to dc inverter.When the current is at 1.4mA , AC to DC converter consumes quiescent current.
NCP1001P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
NCP1001P Applications
There are a lot of ON Semiconductor NCP1001P AC DC Converters applications.
- PDAs
- Standby Power Supplies
- Tablets
- Battery chargers for cordless
- LED lights
- Set-top boxes
- Replacements for bulky plug-in transformers
- Lighting controls
- Low power ac?dc Adapters for Chargers
- Adapters
