NCP1002P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1002 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 1.6mA |
| Input Voltage (Min) | 7.9V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1002P Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.This AC DC converter employs SWITCHING REGULATOR analog IC type.When the switching frequency reaches 100kHz , the process is complete.The voltage range of the supply can be set to 7.5V~10V (Vcc/Vdd).It has a total of 8 terminations.There are 8 pins on the ac/dc converter.The ac-dc converter has 8 pins.It is possible to search for similar acdc converters by using the NCP1002 family.AC to DC converter is necessary to run 1 outputs.There are a ac to dc conversions included in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 2A .The system consumes quiescent current at 1.6mA .
NCP1002P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
NCP1002P Applications
There are a lot of ON Semiconductor NCP1002P AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Set-top boxes
- White goods
- Switching AC-DC Charger
- WiFi Wireless
- Off--line Battery Charger
- Battery chargers for cellular phones
- Auxiliary Power Supply
- LED lights
- Chargers for cell/cordless phones
