NCP1002PG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1002 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Duty Cycle | 72% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 5.33mm |
| Length | 9.27mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1002PG Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter is available in Tube .Through Hole is mounted in the way of this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 100kHz .A range of 7.5V~10V supply voltages (Vcc/Vdd) can be used.There are a total of 8 terminations.In this ac/dc converter, there are 8 pins.The ac-dc converter has 8 pins.Suitable mounting is provided by Through Hole .Similar acdc converters can be found using the NCP1002 family.The number of outputs to run is 1 .AC to DC converter is contained in Switching Regulator or Controllers .A maximum current of 2A may be supplied to the ac to dc inverter.
NCP1002PG Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 100kHz
With 8 pins
NCP1002PG Applications
There are a lot of ON Semiconductor NCP1002PG AC DC Converters applications.
- ZigBee
- Digital cameras
- Off--line Battery Charger
- Laptops
- Standby Power Supplies
- Low-Voltage I/O System Power
- Battery chargers for media tablets
- Chargers for cell/cordless phones
- WiFi Wireless
- Humidifier
