NCP1010AP100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1010 |
| Pin Count | 7 |
| Max Output Current | 100mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1010AP100G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.There is a AC/DC power converter of Tube available.Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs SWITCHING REGULATOR analog IC type.At this point, the switching frequency reaches 100kHz .Within the range of 8.5V~10V supply voltage (Vcc/Vdd), it can be used.There are a total of 7 terminations.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter total to 7 .Suitable mounting is provided by Through Hole .If you select the NCP1010 family, you will be able to search for similar acdc converters.There are a ac to dc conversions included in Switching Regulator or Controllers .
NCP1010AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1010AP100G Applications
There are a lot of ON Semiconductor NCP1010AP100G AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Lighting controls
- Shaver Charger
- Set-top boxes
- USB type-c v1.2 chargers with optional VDM
- Adapters for Handheld Electronics
- AC/DC LED Driver applications
- Standby power supplies for VCR
- Z-Wave
- AC/DC Adaptors/Chargers for E-books
