NCP1010AP130
| Parameters | |
|---|---|
| Number of Terminations | 7 |
| Terminal Finish | TIN LEAD |
| Power (Watts) | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
NCP1010AP130 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.130kHz is the switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8.5V~10V (Vcc/Vdd).It has a total of 7 terminations.A total of 8 pins are present on the ac-dc converter.Ac to dc inverters can be supplied with a maximum current of 0.55A .
NCP1010AP130 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 130kHz
NCP1010AP130 Applications
There are a lot of Rochester Electronics, LLC NCP1010AP130 AC DC Converters applications.
- AC/DC Adaptors/Chargers for E-books
- Adapters
- Battery chargers for mobile devices with touchpad display
- Standby Power for General Off-Line Applications
- Power adapters for monitors
- Low-Voltage I/O System Power
- Switching AC-DC Charger
- White goods
- Power adapters for network devices
- Power Adaptors
