NCP1010ST100T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 8W |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1010 |
| Pin Count | 4 |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 950μA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Output Power | 19W |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1010ST100T3G Overview
This ac to dc converter is embedded in package TO-261-4, TO-261AA .The ac dc converter is available in Tape & Reel (TR) case.Surface Mount mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The switching frequency reaches 100kHz .The AC/DC converter is capable of being used when the supply voltage is 8.5V~10V (Vcc/Vdd).There are a total of 4 terminations.There are 4 pins on the ac/dc converter.Up to 4 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .If you select the NCP1010 family, you will be able to search similar acdc converters.The following ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 100mA .The output power of a coverter generates 19W .Currently, there are 1 channels available.
NCP1010ST100T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
With 4 pins
Output Current at 100mA
With 1 channels on it
NCP1010ST100T3G Applications
There are a lot of ON Semiconductor NCP1010ST100T3G AC DC Converters applications.
- Automotive Infotainment
- Rice Cooker
- AC?DC USB chargers for Tablets
- ZigBee
- Air conditioners
- Portable audio
- Adapter/Charger for Cordless Phones
- Battery chargers for cordless
- Appliances
- Power adapters for network devices
