NCP1010ST130T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1010 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 130kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1010ST130T3G Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.The ac dc converter is available in Tape & Reel (TR) case.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.There is 130kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 8.5V~10V (Vcc/Vdd).In total, it has 4 terminations.A ac/dc converter with 4 pins is available.The pins of the ac-dc converter total to 4 .There are no problem mounting the ac dc converters by Surface Mount .If you select the NCP1010 family, you will be able to search similar acdc converters.The following ac to dc conversions are contained in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 0.55A .The AC to DC converter input voltage can be powered under 10V .An input voltage of less than -300mV V is required to operate the AC to DC inverter.
NCP1010ST130T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 130kHz
With 4 pins
NCP1010ST130T3G Applications
There are a lot of ON Semiconductor NCP1010ST130T3G AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Handheld/Battery-Powered Systems
- Set-top boxes
- Power tools fast chargers with trickle and on/off
- Home appliances
- Battery chargers for cellular phones
- Humidifier
- Wireless System
- Home Appliance Applications
- Low-Voltage I/O System Power
