NCP1010ST65T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1010 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1010ST65T3 Overview
It is embedded in package TO-261-4, TO-261AA .In Tape & Reel (TR) case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.When the switching frequency reaches 65kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~10V , the AC/DC converter may be used.Total terminations are 4 .The ac/dc converter has a total of 4 pins.There are 4 pins on the ac-dc converter.The NCP1010 family can be used to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .Ac to dc inverters can be powered by up to 0.55A current.
NCP1010ST65T3 Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
NCP1010ST65T3 Applications
There are a lot of ON Semiconductor NCP1010ST65T3 AC DC Converters applications.
- Power adapters for monitors
- White goods
- Cellular phone chargers
- Air conditioners
- Set Top Boxes (STB)
- AC?DC USB chargers for Tablets
- PDAs
- AC?DC USB chargers for Cameras
- Linear Adapter Replacements
- Power Adaptors
