NCP1010ST65T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1010 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1010ST65T3G Overview
In the TO-261-4, TO-261AA package, the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Switching frequency reaches 65kHz Hz.It can be used within the range of 8.5V~10V supply voltage (Vcc/Vdd).As a result, it has had 4 terminations.The ac/dc converter has a total of 4 pins.In this ac-dc converter, there are 4 pins.Suitable mounting is provided by Surface Mount .It is possible to search for similar acdc converters by using the NCP1010 family.The ac to dc conversions can be found in Switching Regulator or Controllers .In theory, the maximum current that can be supplied to the ac to dc inverter is 0.55A .Under 10V , it is possible to power the AC to DC converter's input voltage.The AC to DC inverter can be used with an input voltage of less than -300mV V.There are 1 channels.
NCP1010ST65T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
With 1 channels on it
NCP1010ST65T3G Applications
There are a lot of ON Semiconductor NCP1010ST65T3G AC DC Converters applications.
- Utility meters
- RCC SMPS
- Power tools
- USB-PD 2.0
- ATX/BTX Auxiliary Power
- Wireless System
- 3.3V power supplies
- Low power ac?dc Adapters for Chargers
- Remotely-controlled appliances
- Adaptors for Portable Media Player
