NCP1011AP130
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1011 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1011AP130 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.Tube case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 130kHz , the process is complete.Vcc/Vdd can be used within the range of 8.5V~10V supply voltage.In total, it has 7 terminations.The ac/dc converter has a total of 7 pins.A total of 8 pins are present on the ac-dc converter.Similar acdc converters can be found using the NCP1011 family.AC to DC converter is contained in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 0.55A .
NCP1011AP130 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 130kHz
With 7 pins
NCP1011AP130 Applications
There are a lot of ON Semiconductor NCP1011AP130 AC DC Converters applications.
- Handheld/Battery-Powered Systems
- Appliances
- Linear Adapter Replacements
- Standby Power Supplies
- Home Appliance Applications
- Automotive Clusters
- Utility meters
- Standby power supplies for TV
- Replacements for bulky plug-in transformers
- Battery Chargers
