NCP1011AP130G
| Parameters | |
|---|---|
| Max Output Current | 250mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 130kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1011 |
| Pin Count | 7 |
NCP1011AP130G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The switching frequency reaches 130kHz .Within the range of 8.5V~10V supply voltage (Vcc/Vdd), it can be used.As a result, it has had 7 terminations.The ac/dc converter has 7 pins.A total of 7 pins are present on the ac-dc converter.Suitable mounting is provided by Through Hole .Similar acdc converters can be found using the NCP1011 family.The ac to dc conversions can be found in Switching Regulator or Controllers .
NCP1011AP130G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 130kHz
With 7 pins
NCP1011AP130G Applications
There are a lot of ON Semiconductor NCP1011AP130G AC DC Converters applications.
- LED Driver
- Cellular phone chargers
- Universal input AC/DC adapters (15W - 45W)
- Power tools
- Set Top Boxes (STB)
- Low power ac?dc Adapters for Chargers
- Adapter/Charger for Cordless Phones
- Wireless System
- Shaver Charger
- Air conditioners
