NCP1011ST100T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1011 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.55A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1011ST100T3 Overview
A ac to dc converter of the package TO-261-4, TO-261AA contains the ac to dc converter.It is available in Tape & Reel (TR) AC/DC power converter.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.There is 100kHz switching frequency.This AC/DC converter is suitable for operation in the range of 8.5V~10V supply voltage (Vcc/Vdd).It has a total of 4 terminations.There are 4 pins on this ac/dc converter.There are 4 pins in total.Similar acdc converters can be found using the NCP1011 family.The ac to dc conversions are included in Switching Regulator or Controllers .Ac to dc inverters can be supplied with a maximum current of 0.55A .
NCP1011ST100T3 Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
With 4 pins
NCP1011ST100T3 Applications
There are a lot of ON Semiconductor NCP1011ST100T3 AC DC Converters applications.
- Shaver Charger
- Replacements for bulky plug-in transformers
- Utility meters
- AC?DC USB chargers for Cell Phones
- Switching AC-DC Charger
- Universal Off-Line Power Supplies
- Standby power supplies for VCR
- AC-DC Output Power Conversion Applications
- Humidifier
- Automotive Infotainment
