NCP1012AP065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1012 |
| Pin Count | 7 |
| Max Output Current | 1.25A |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Max Output Voltage | 12V |
| Topology | Flyback |
| Min Input Voltage | 7.9V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 9.1V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1012AP065G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.As soon as the switching frequency reaches 65kHz , the circuit is closed.Vcc/Vdd can be used within the range of 8.5V~10V supply voltage.As a result, it has a total of 7 terminations.On the ac/dc converter, there are 7 pins.The pins of the ac-dc converter total to 7 .Through Hole is the recommended mounting method for the ac dc converters.It is possible to search for similar acdc converters by using the NCP1012 family.The ac to dc conversions can be found in Switching Regulator or Controllers .An input voltage of 9.1V is available for powering the AC to DC converter.It is possible to operate the AC to DC inverter with an input voltage that is less than 7.9V V.
NCP1012AP065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
NCP1012AP065G Applications
There are a lot of ON Semiconductor NCP1012AP065G AC DC Converters applications.
- Auxiliary Power Supplies
- Digital cameras
- Set Top Boxes (STB)
- Switching AC-DC Charger
- Portable Apparatus
- Universal Off-Line Power Supplies
- Adapter for ADSL
- Standby Power for General Off-Line Applications
- Charger
- AC--DC Adapter
