NCP1012AP100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1012 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1012AP100 Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.Switching frequency reaches 100kHz Hz.It can be used within the range of 8.5V~10V supply voltage (Vcc/Vdd).There have been 7 terminations of this program.There are 8 pins in total.A similar acdc converter can be searched by using the NCP1012 family.Switching Regulator or Controllers contains the ac to dc conversions.The maximum current that can be supplied to the ac to dc inverter is 1A .The interface IC conducts when the supply voltage is 10V .
NCP1012AP100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
Operating Supply Voltage at the range of 10V
NCP1012AP100 Applications
There are a lot of ON Semiconductor NCP1012AP100 AC DC Converters applications.
- White goods
- Cellular phone chargers
- AC/DC LED Driver applications
- Z-Wave
- Cleaners
- Remotely-controlled appliances
- Adapter/Charger for Cell
- Battery Chargers
- Power tools fast chargers with trickle and on/off
- USB type-c v1.2 chargers with optional VDM
