NCP1012ST130T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1012 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1012ST130T3 Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.The ac dc converter is available in Tape & Reel (TR) case.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.There is 130kHz switching frequency.Within the range of 8.5V~10V supply voltage (Vcc/Vdd), it can be used.In total, there are 4 terminations.In this ac/dc converter, there are 4 pins.The pins of the ac-dc converter count up to 4 .If you select the NCP1012 family, you will be able to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .Ac to dc inverters can be powered by up to 1A current.Interfacing ICs conduct when there is 10V supply voltage.
NCP1012ST130T3 Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 130kHz
With 4 pins
Operating Supply Voltage at the range of 10V
NCP1012ST130T3 Applications
There are a lot of ON Semiconductor NCP1012ST130T3 AC DC Converters applications.
- Lighting controls
- Universal input AC/DC adapters (15W - 45W)
- Low power ac?dc Adapters for Chargers
- Automotive Infotainment
- Battery chargers for cellular phones
- Humidifier
- Linear Adapter Replacements
- Battery Chargers
- Vacuum Cleaner
- AC?DC USB chargers for Cell Phones
