NCP1012ST65T3G
| Parameters | |
|---|---|
| Voltage - Breakdown | 700V |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 11 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1012 |
| Pin Count | 4 |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 65kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
NCP1012ST65T3G Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.The AC/DC power converter is available in Tape & Reel (TR) .This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.At this point, the switching frequency reaches 65kHz .This AC/DC converter is designed for use within the range of 8.5V~10V supply voltage (Vcc/Vdd).In total, it has 4 terminations.The ac/dc converter has a total of 4 pins.In this ac-dc converter, there are 4 pins.The ac dc converters are suitable for mounting by Surface Mount .Based on the NCP1012 family, you can search for similar acdc converters.Switching Regulator or Controllers contains the ac to dc conversions.Currently, the maximum current that the ac to dc inverter can take is 1A .There are 1 channels.
NCP1012ST65T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
With 1 channels on it
NCP1012ST65T3G Applications
There are a lot of ON Semiconductor NCP1012ST65T3G AC DC Converters applications.
- DVD players
- Replacements for bulky plug-in transformers
- RCC SMPS
- Industrial controls
- Wireless System
- Set-top boxes
- Standby Power Supplies
- Cleaners
- Adapters
- Utility meters
