NCP1013ST130T3G
| Parameters | |
|---|---|
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 130kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1013 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
NCP1013ST130T3G Overview
This ac to dc converter is embedded in package TO-261-4, TO-261AA .In Tape & Reel (TR) AC/DC power converter, it is available.There is a AC/DC converter mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.Switching frequency reaches 130kHz Hz.This AC/DC converter is suitable for operation in the range of 8.5V~10V supply voltage (Vcc/Vdd).As a result, it has a total of 4 terminations.A ac/dc converter with 4 pins is available.The pins of the ac-dc converter count up to 4 .The ac dc converters are suitable to mount by Surface Mount .You can search similar acdc converters based on NCP1013 family.There are a ac to dc conversions included in Switching Regulator or Controllers .Under 10V , it is possible to power the AC to DC converter's input voltage.If the input voltage is less than -300mV V, the AC to DC inverter can be used.There are 1 channels.
NCP1013ST130T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 130kHz
With 4 pins
With 1 channels on it
NCP1013ST130T3G Applications
There are a lot of ON Semiconductor NCP1013ST130T3G AC DC Converters applications.
- ZigBee
- Air conditioners
- Utility meters
- Set Top Boxes (STB)
- Remotely-controlled appliances
- Lighting controls
- Laptops
- 3.3V power supplies
- Small off-line low voltage power supplies
- Standby Power Supplies
