NCP1013ST65T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1013 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1013ST65T3G Overview
There is a ac to dc converter embedded in package TO-261-4, TO-261AA .Tape & Reel (TR) case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.Switching frequency reaches 65kHz Hz.A range of 8.5V~10V supply voltages (Vcc/Vdd) can be used.As a result, it has had 4 terminations.Approximately 4 pins are present on the ac/dc converter.The ac-dc converter has 4 pins.It are possible to mount thare ac dc converters by Surface Mount .Similar acdc converters can be found using the NCP1013 family.There are a ac to dc conversions included in Switching Regulator or Controllers .
NCP1013ST65T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
NCP1013ST65T3G Applications
There are a lot of ON Semiconductor NCP1013ST65T3G AC DC Converters applications.
- IoT Applications
- Z-Wave
- White goods
- Power Adaptors
- Adapters for Handheld Electronics
- Linear Adapter Replacements
- Battery Chargers
- AC?DC USB chargers for Cell Phones
- Wall switches
- Replacements for bulky plug-in transformers
