NCP1014AP065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 12W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1014 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 450mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation | 19W |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1014AP065G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .Through Hole mounts this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~10V , the AC/DC converter may be used.There are a total of 7 terminations in it.The ac/dc converter has a total of 7 pins.There are 7 pins on the ac-dc converter.If you select the NCP1014 family, you will be able to search similar acdc converters.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 450mA .There is 700V voltage output from it.When operating at a frequency of 65kHz , AC to DC converter is capable of reaching high efficiency.This is the standard of REACH SVHC : No SVHC .Under 250V , it is possible to power the AC to DC converter's input voltage.An input voltage of less than 100V V is required to operate the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 250V .
NCP1014AP065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 450mA
NCP1014AP065G Applications
There are a lot of ON Semiconductor NCP1014AP065G AC DC Converters applications.
- PDAs
- IoT Applications
- Tablets
- Appliances
- Utility meters
- Lighting controls
- SMPS house keeping power supplies
- Linear Adapter Replacements
- Adapter for ADSL
- Z-Wave
