NCP1014AP100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 12W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1014 |
| Pin Count | 7 |
| Output Voltage | 700V |
| Max Output Current | 450mA |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation | 19W |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1014AP100G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The voltage range of the supply can be set to 8.5V~10V (Vcc/Vdd).In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.There are 7 pins on the ac-dc converter.The NCP1014 family allows you to search for similar acdc converters.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 450mA .As a result, its output voltage is 700V .A high efficiency can be achieved by operating at a frequency of 100kHz .Here is the standard for REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 250V .The AC to DC inverter may be operated with an input voltage less than 100V volts.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 250V .We currently have 1 channels available.
NCP1014AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 450mA
With 1 channels on it
NCP1014AP100G Applications
There are a lot of ON Semiconductor NCP1014AP100G AC DC Converters applications.
- Wireless System
- Z-Wave
- Low-Voltage I/O System Power
- Standby and Auxiliary Power Supplies
- 3.3V power supplies
- Appliance Power Supplies
- Adapter/Charger for Cell
- Standby power supplies for VCR
- Portable Apparatus
- Standby Power Supplies
