NCP1014APL065R2G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 12W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Base Part Number | NCP1014 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 450mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 250V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Length | 9.525mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1014APL065R2G Overview
A ac to dc converter of the package 8-SMD (7 Leads), Gull Wing contains the ac to dc converter.The AC/DC power converter type is Tape & Reel (TR) .There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~10V , the AC/DC converter may be used.There are a total of 7 terminations.In this ac/dc converter, there are 7 pins.A total of 7 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .If you select the NCP1014 family, you will be able to search similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 700V output voltage from this AC/DC converter.A high efficiency is achieved when operating at a frequency of 65kHz .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 250V voltage.Input voltages less than 100V volts can be used to operate the AC to DC inverter.An input voltage (AC) should be applied under 250V to the AC to DC power converter.
NCP1014APL065R2G Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 7 pins
NCP1014APL065R2G Applications
There are a lot of ON Semiconductor NCP1014APL065R2G AC DC Converters applications.
- Adapter/Charger for Cell
- Battery chargers for cordless
- Appliances
- Power adapters for network devices
- Low power ac?dc Adapters for Chargers
- Remotely-controlled appliances
- Low-Voltage I/O System Power
- Chargers for cell/cordless phones
- ATX/BTX Auxiliary Power
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
