NCP1014ST100T3G
| Parameters | |
|---|---|
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1014 |
| Pin Count | 4 |
| Max Output Current | 450mA |
| Input Voltage-Nom | 8V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
NCP1014ST100T3G Overview
In the package TO-261-4, TO-261AA , the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.This AC/DC converter is suitable for operation in the range of 8.5V~10V supply voltage (Vcc/Vdd).A total of 4 terminations have been recorded.There are 4 pins on this ac/dc converter.There are a total of 4 pins on the ac-dc converter.If you select the NCP1014 family, you will be able to search for similar acdc converters.AC to DC converter is included in Switching Regulator or Controllers .We have set the output current to 450mA .As long as AC to DC converter is operated at frequency 100kHz ,it is capable of attaining high efficiency.It is possible to read the REACH SVHC standard at: No SVHC .An input voltage of 250V is available for powering the AC to DC converter.The AC to DC inverter may be operated with an input voltage less than 100V volts.The input voltage (AC) that can be applied in the AC to DC power converter should under 250V .The number of channels is 1 .
NCP1014ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
Output Current at 450mA
With 1 channels on it
NCP1014ST100T3G Applications
There are a lot of ON Semiconductor NCP1014ST100T3G AC DC Converters applications.
- Switching AC-DC Adapter
- Battery Chargers
- Air conditioners
- Replacements for bulky plug-in transformers
- Wireless System
- Utility meters
- AC?DC USB chargers for Cameras
- Portable Apparatus
- Z-Wave
- Small off-line low voltage power supplies
