NCP1014ST65T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1014 |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1014ST65T3 Overview
An embedded ac to dc converter is included in TO-261-4, TO-261AA package.In Tape & Reel (TR) AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.The switching frequency reaches 65kHz .This AC/DC converter is suitable for operation in the range of 8.5V~10V supply voltage (Vcc/Vdd).There are a total of 4 terminations.The ac/dc converter has a total of 4 pins.A total of 4 pins are present on the ac-dc converter.Similar acdc converters can be found using the NCP1014 family.The ac to dc conversions can be found in Switching Regulator or Controllers .It is possible to supply the ac to dc inverter with a maximum current of 1A .As soon as the supply voltage drops to 10V , the interface IC conducts.
NCP1014ST65T3 Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
Operating Supply Voltage at the range of 10V
NCP1014ST65T3 Applications
There are a lot of ON Semiconductor NCP1014ST65T3 AC DC Converters applications.
- Universal Off-Line Power Supplies
- Low-Voltage I/O System Power
- Air Conditioning
- Wall switches
- 3.3V power supplies
- DVD players
- White goods
- Wireless System
- AC/DC Adaptors/Chargers for Cell Phones
- Standby Power Supplies
