NCP1015AP065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1015 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 1.25A |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1A |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Output Power | 19W |
| Max Output Voltage | 12V |
| Topology | Flyback |
| Min Input Voltage | 7.9V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 9.1V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1015AP065G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter is available in Tube .A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 65kHz , the circuit is closed.The voltage range of the supply can be set to 8.5V~10V (Vcc/Vdd).As a result, it has had 7 terminations.In this ac/dc converter, there are 7 pins.The pins of the ac-dc converter total to 7 .The ac dc converters are suitable to mount by Through Hole .You can search similar acdc converters based on NCP1015 family.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .It has been set to 450mA for the output current.Its output voltage amounts to 700V .SVHC for REACH can be found in the standard No SVHC .Under 9.1V , it is possible to power the AC to DC converter's input voltage.The output power of a coverter is assumed to be 19W .It is possible to use the AC to DC inverter with an input voltage less than 7.9V V.The AC to DC power converter's input voltage (AC) should be below 250V .
NCP1015AP065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 450mA
NCP1015AP065G Applications
There are a lot of ON Semiconductor NCP1015AP065G AC DC Converters applications.
- Standby Power Supplies
- AC-DC Output Power Conversion Applications
- Home appliances
- WiFi Wireless
- Adaptors for DSCs
- Power tools
- Industrial controls
- White goods
- Switching AC-DC Adapter
- AC?DC USB chargers for Cell Phones
