NCP1015ST100T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Base Part Number | NCP1015 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Operating Supply Voltage | 10V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 950μA |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 67% |
| Output Isolation | Isolated |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1015ST100T3G Overview
It is embedded in package TO-261-4, TO-261AA .You can get it in AC/DC power converter Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.This AC/DC converter is designed for use within the range of 8.5V~10V supply voltage (Vcc/Vdd).In total, it has 4 terminations.There are 4 pins on the ac/dc converter.Up to 4 pins are present on the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .Similar acdc converters can be found using the NCP1015 family.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .450mA is set as the output current.Its output voltage is700V .AC to DC converter reaches high efficiency when operated at a frequency of 100kHz .You are able to read the REACH SVHC standard at: No SVHC .When the supply voltage is 10V , the interface IC may conduct.
NCP1015ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
Output Current at 450mA
Operating Supply Voltage at the range of 10V
NCP1015ST100T3G Applications
There are a lot of ON Semiconductor NCP1015ST100T3G AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- Chargers for cell/cordless phones
- DVD players
- Power tools fast chargers with trickle and on/off
- Records
- Low-Voltage I/O System Power
- LED Driver
- Z-Wave
- Power adapters for monitors
- AC/DC Adaptors/Chargers for Cell Phones
