NCP1027P065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1027 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Fixed |
| Max Output Current | 880mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation | 25mW |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.2V~10V |
| Output Power | 25W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Min Input Voltage | 90V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | -300mV |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Power, Over Voltage, Short Circuit |
| Max Duty Cycle | 87 % |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Min Input Voltage (AC) | 90V |
| Max Input Voltage (AC) | 265V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1027P065G Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter type is Tube .A AC/DC converter of this type is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of 0°C~125°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.This AC/DC converter is designed for use within the range of 7.2V~10V supply voltage (Vcc/Vdd).It has a total of 8 terminations.There are 7 pins on this ac/dc converter.The pins of the ac-dc converter total to 7 .It is suitable for mounting by Through Hole .The NCP1027 family allows you to search for similar acdc converters.Running 1 outputs is available.The ac to dc conversions are included in Switching Regulator or Controllers .We are setting the output current to 800mA .The output voltage of the AC/DC converter is 700V .As long as AC to DC converter is operated at frequency 65kHz ,it is capable of attaining high efficiency.It is possible to read the REACH SVHC standard at: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.Coverters generate 25W in terms of output power.An input voltage of less than 90V V is required to operate the AC to DC inverter.AC to DC power converters should be able to accept input voltages (AC) below 265V .There is a Fixed output configured.
NCP1027P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 800mA
Output Type : Fixed
NCP1027P065G Applications
There are a lot of ON Semiconductor NCP1027P065G AC DC Converters applications.
- Standby Power Supplies
- Appliance Power Supplies
- AC/DC Adaptors/Chargers for Cordless Phone
- LED Driver
- Charger
- Utility meters
- Adapter for ADSL
- Home appliances
- Standby power supplies for VCR
- Automotive Infotainment
