NCP1027P100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 25W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1027 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Fixed |
| Max Output Current | 880mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.2V~10V |
| Output Power | 15W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Min Input Voltage | 7.9V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 8.9V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | -300mV |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Power, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1027P100G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of 0°C~125°C TJ .A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.100kHz is the switching frequency.This AC/DC converter is suitable for operation in the range of 7.2V~10V supply voltage (Vcc/Vdd).A total of 8 terminations have been recorded.There are 7 pins on the ac/dc converter.A total of 7 pins are present on the ac-dc converter.Suitable mounting is provided by Through Hole .The NCP1027 family allows you to search for similar acdc converters.A total of 1 outputs are available for processing.There are a ac to dc conversions included in Switching Regulator or Controllers .Its output voltage is700V .An input voltage of 8.9V is available for powering the AC to DC converter.15W is the output power of a coverter.An input voltage of less than 7.9V volts is acceptable for use with this AC to DC inverter.The output it is configured with uses Fixed .
NCP1027P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Type : Fixed
NCP1027P100G Applications
There are a lot of ON Semiconductor NCP1027P100G AC DC Converters applications.
- AC?DC USB chargers for Tablets
- IoT Applications
- Charger
- Appliances
- LED lights
- Power tools
- Set-top boxes
- Handheld/Battery-Powered Systems
- Adapters for Handheld Electronics
- Automotive Infotainment
