NCP1028P065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | NCP1028 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Max Output Current | 800mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.9mA |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 7.2V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Power, Short Circuit |
| Max Duty Cycle | 87 % |
| Isolation | Non-Isolated |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1028P065G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~125°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 65kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 7.2V~10V .There are a total of 7 terminations.It contains 7 pins.There are 7 pins on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .It is possible to search for similar acdc converters by using the NCP1028 family.A total of 1 outputs are to be processed.AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is set to 800mA for the output current.There is a possibility of powering the AC to DC converter under a voltage of 10V .The AC to DC inverter may be operated with an input voltage less than -300mV volts.
NCP1028P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 800mA
NCP1028P065G Applications
There are a lot of ON Semiconductor NCP1028P065G AC DC Converters applications.
- Power tools
- AC?DC USB chargers for Cell Phones
- Set-top boxes
- Appliance Power Supplies
- Small off-line low voltage power supplies
- Adapter for ADSL
- Battery chargers for mobile devices with touchpad display
- AC/DC LED Driver applications
- AC?DC USB chargers for Tablets
- Standby Power Supply
