NCP1028P100G
| Parameters | |
|---|---|
| Max Output Current | 800mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation | 25W |
| Voltage - Supply (Vcc/Vdd) | 7.2V~10V |
| Max Output Voltage | 5V |
| Topology | Flyback |
| Min Input Voltage | 7.9V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 8.9V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Power, Short Circuit |
| Duty Cycle | 80% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Min Input Voltage (AC) | 90V |
| Max Input Voltage (AC) | 265V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | NCP1028 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
NCP1028P100G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.There is a AC/DC power converter of Tube available.There is a AC/DC converter mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of 0°C~125°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 7.2V~10V , the AC/DC converter may be used.It has a total of 7 terminations.There are 7 pins on this ac/dc converter.In this ac-dc converter, there are 7 pins.The ac dc converters is suitable for mounting by Through Hole .If you select the NCP1028 family, you will be able to search similar acdc converters.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .This AC/DC converter produces a voltage of 700V as its output.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 100kHz .You can read the standard for REACH SVHC at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 8.9V .If the input voltage is less than 7.9V V, the AC to DC inverter can be used.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
NCP1028P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
NCP1028P100G Applications
There are a lot of ON Semiconductor NCP1028P100G AC DC Converters applications.
- AC/DC Adaptors/Chargers for PDAs
- AC?DC USB chargers for Cell Phones
- Battery chargers for smart phones
- ATX/BTX Auxiliary Power
- Networking
- Standby Power for General Off-Line Applications
- Tablets
- Replacements for bulky plug-in transformers
- Automotive Clusters
- Standby power supplies for TV
