NCP1030DMR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 3W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 582mW |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1030 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Quiescent Current | 3mA |
| Control Features | Frequency Control |
| Input Voltage (Min) | 8V |
| Topology | Boost, Flyback, Forward |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.68A |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Duty Cycle | 75% |
| Output Isolation | Either |
| Voltage - Breakdown | 200V |
| Voltage - Start Up | 10.2V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1030DMR2 Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the ac to dc converter is embedded.The ac dc converter is available in Tape & Reel (TR) case.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .In this AC to DC transformer, the switching frequency is Up to 1MHz .This AC/DC converter is designed for use within the range of 7.6V~16V supply voltage (Vcc/Vdd).Total terminations are 8 .The pins of the ac-dc converter total to 8 .The NCP1030 family can be used to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions can be found in Switching Regulator or Controllers .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Currently, the maximum current that the ac to dc inverter can take is 0.68A .The AC to DC power supply consumes quiescent current at 3mA .
NCP1030DMR2 Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
NCP1030DMR2 Applications
There are a lot of ON Semiconductor NCP1030DMR2 AC DC Converters applications.
- Open Frame Switching Power Supply
- Adaptors for Portable Media Player
- Networking
- Standby power
- Adapter/Charger for Cordless Phones
- Small off-line low voltage power supplies
- AC/DC Adaptors/Chargers for Cordless Phone
- Adapters for Handheld Electronics
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Low-Voltage I/O System Power
