NCP1030DMR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 800kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1030 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 8.6V |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Max Supply Current | 4mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 16V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 80 % |
| Duty Cycle | 75% |
| Output Isolation | Either |
| Voltage - Breakdown | 200V |
| Voltage - Start Up | 10.2V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1030DMR2G Overview
An embedded ac to dc converter is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.You can get it in AC/DC power converter Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.The switching frequency reaches Up to 1MHz .Supply voltage (Vcc/Vdd) does not need to exceed 7.6V~16V .In total, there are 8 terminations.The ac/dc converter has 8 pins.The pins of the ac-dc converter count up to 8 .It is suitable for mounting by Surface Mount .If you select the NCP1030 family, you will be able to search for similar acdc converters.There are 2 outputs to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .We have set the output current to 500mA .This AC/DC converter produces a voltage of 8.6V as its output.A high efficiency can be achieved by operating at a frequency of 800kHz .The AC to DC converter can be powered from the input voltage under 16V .It is possible to use the AC to DC inverter with an input voltage less than 8V V.When the supply voltage is 16V , the interface IC conducts.AC to DC converter can handle a maximum supply current of 4mA .
NCP1030DMR2G Features
Packaged with 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 500mA
Operating Supply Voltage at the range of 16V
NCP1030DMR2G Applications
There are a lot of ON Semiconductor NCP1030DMR2G AC DC Converters applications.
- Shaver Charger
- Automotive Clusters
- WiFi Wireless
- Records
- AC/DC Adaptors/Chargers for Cell Phones
- 3.3V power supplies
- LED lights
- Industrial controls
- Auxiliary Power Supplies
- Portable Apparatus
